Description
TVS Factory replica watch Omega Seamaster 215.32.46.51.06.001
Today, we are reviewing a watch from the Omega Seamaster Ocean Universe 600m series. As for whether this replica watch today is water-resistant to 600 meters or not, We’ll know about this after we review it later. This watch is playfully called the “Green Sea King” by watch enthusiasts. Both in terms of appearance and performance, it has won the hearts of watch enthusiasts. I will comprehensively analyze whether this TVS factory Omega Seamaster 215.32.46.51.06.001 replica watch is worth buying.
In terms of the degree of restoration of the gray and green color contrast in the appearance
TVS Factory has also restored a large diameter of 45.5MM. Such a large diameter is very popular and looks very elegant when worn. This Omega Seamaster features multi-layer PVD vacuum coating combined with a hand-brushed process, which is much better than that of other factories. Some factories only use a simple sandblasting process. The brushing treatment of TVS factory presents a very fine sunburst pattern on the stainless steel base. Different from the radioactive sunburst pattern, this is a vertical sunburst pattern, and there will also be a gradient effect in color. Even for large watches, doing it this way will make the visual effect stretch vertically and won’t look bulky. The green paint surface digital scale at the 12 o ‘clock position is a bold design. TVS factory adopts a three-layer filling process, keeping the saturation of the green within an just right range. Unlike cheap paint, it won’t be reflective and dazzling, nor will there be too much color difference. After I exposed the green paint surface to ultraviolet light for ten minutes, there was no fluorescence reaction, which proved that the fluorescent material used was not ordinary. The materials used by TVS factory are not cheap either.
The application of the green ceramic bezel on this Ocean universe chronograph is a replica watch of the Omega Seamaster 215.32.46.51.06.001 from TVS factory. The unidirectional rotating bezel is made of zirconia ceramic base and presents a relatively authentic military green color after metallization treatment. In terms of scale filling, TVS Factory injected zirconium-based metal glass alloys into ceramic scale grooves at high temperatures. After cooling, silver-gray numbers seamlessly bonded to the ceramics were formed. After testing, it won’t be easily scratched off and is relatively firm. The two small green dials on the dial are also made of ceramic, with independent ceramic plates embedded into the main dial. The edge gap is less than 0.05mm, without a stepped feel. The contrast between the ceramic bezel and the metal main dial material enhances the overall texture. The magnifying glass coating of the calendar display window is made of double-sided anti-reflective material, and there is no obvious distortion when viewed at an Angle.
The combination of a stainless steel case and a rubber strap
The material is made of 316L stainless steel. The side is treated with a large area of brushed finish, which can effectively hide daily scratches. The lugs have a short and powerful arc. The shoulder guard part has a slightly curved bevel, so it won’t cause hand discomfort even when worn daily. The screw-down crown is relatively large in size, allowing for easy operation even when wearing gloves. Paired with a fluororubber sealing ring, its water resistance can reach 300 meters in static tests. It is not recommended to wear it when taking a hot bath or coming into contact with hot water.
The embossing depth on the surface of the grid-textured rubber watch strap is relatively uniform, retaining the sporty style while increasing friction, making it more stable when worn. The light grey and green stitching has a uniform and neat density. The rubber is soft in texture, has good resilience and will not have creases. There is also a fine-tuning system inside. The wearing comfort is good. The overall restoration degree is high.
The degree of restoration of the movement structure
TVS Factory used the 9900 chronograph movement and did not adopt the traditional 7750 movement structure. Instead, it adopted a two-plate main deck design, which could reduce the thickness of the movement and bring the center of gravity closer to the wrist when worn. When the timer starts, the second hand hardly shakes, and the sound of the button rebounding is clear and crisp. It has excellent anti-magnetic performance, and there is no significant change in timekeeping error even in the magnetic fields used daily. Whether in terms of material or performance, this is a high-quality and cost-effective replica watch.
