Patek Philippe CUBITUS

Patek Philippe CUBITUS – 1:1 Best Edition Replica Watches,Patek Philippe Cubitus In the field of replica watches, the Patek Philippe Cubitus series has always been the focus of high-end players. As a highly recognizable “square sports watch” under the brand, the Cubitus replica watch combines the elegance of Nautilus and the toughness of sports watches, while PP+ factory and PPF factory are the two top manufacturers with the highest reduction of this series on the market. PP+ factories are known as “shell cover expert” in the industry. His Patek Philippe Cubitus replica watch (7128-1R-001) is forged with imported 316L stainless steel and is formed in one CNC. The chamfering arc of the front, side and bottom cover of the case share the same set of CAD data as the genuine product, and the error is controlled within 0.05 mm; especially the “one-shaped” notches of the 8 exposed screws on the bezel are still sharp and burrs-free under a 10x magnifying glass. The dial is the biggest selling point of the PP+ factory this time: the brown sun pattern is made of Swiss Leschaux S.A. five-axis machine with the same model, with a width of 0.12 mm and a depth of 0.03 mm, which is consistent with the authentic product; the inner side of the calendar box is made of “mirror-grade” black paint, and the side is not white. In terms of movement, the PP+ factory continues to use the 9015 modified Cal.324 SC solution with a market-verified stability. The thickness is only 8.4 mm, which is 0.1 mm thicker than the genuine product, which is difficult to distinguish with the naked eye. The measured daily difference is +3 s, the noise is less than 28 dB, and the extra noise of the “modified movement” is almost impossible to feel when worn on a daily basis. PPF factory has gained a foothold in the player circle with “full functions”. Although Patek Philippe Cubitus Replica Watch 7128-1R-001 is a three-needle basic model, the PPF factory focuses on the “metal texture”: the material, the PPF factory uses higher cost 904L stainless steel, which has high corrosion resistance; the rose gold version has a thickness of 0.3 µm, and there is no obvious fading when worn for three months. The movement structure is similar to that of PP+ factory, but PPF factory upgraded automatic gyroscope bearings to imported Swiss ceramic beads, with one-way winding efficiency increased by 12%, and the actual measurement of dynamic storage for 48 hours; in terms of price, PPF factory is about 8% lower than PP+ factory, and is hailed as the “cost-performance ceiling” by watch fans.