Description
GR Factory replica watch Audemars Piguet 15207
The popularity of Audemars Piguet Royal Oak is beyond doubt. 15207 is not as popular. It’s up to your own taste. This kind of watch, which is simple yet slightly luxurious, will still be favored by people who are low-key and have good taste. GR Factory has attracted the attention of a group of watch enthusiasts with its high degree of appearance restoration. Now, let’s objectively analyze and deeply evaluate this GR factory Audemars Piguet 15207 OR.oo.1240 OR.01 replica watch, especially focusing on the imitation of the Cal.2121 movement, the onyx dial craftsmanship, and the durability of the rose gold material. Help you make better decisions.
The most fundamental difference from the genuine product
In terms of thickness, the genuine product is only 8.1mm thick, with diamond-studded hour markers and made of solid 18K rose gold. The thickness of the GR factory is controlled at 8.5mm. Although it does not reach the original ultra-thin level, it is thinner compared to most versions on the market. The difference in weight is also quite obvious. This is because the GR factory uses 316L stainless steel plated with rose gold. Overall, it is not as heavy as solid rose gold. The weight reduction is significant when held, and there is no very heavy pressing feel. This is also determined by the material.
How long-lasting is rose gold electroplating
The GR factory’s Audemars Piguet 15207OR.OO.1240OR.01 replica watch is made of 316L stainless steel and features a PVD vacuum electroplating 18K rose gold process. This technique is quite mature in the replica watch industry. Its advantages include a color that is close to the genuine product, less prone to fading, and a longer durability than the water plating process. There are still some drawbacks. The parts that are frequently in contact and rubbed are more prone to wear and tear, and after wearing for a long time, there may also be a phenomenon of showing white. Compared with the thicker gold plating of the JF factory, the GR factory is still slightly inferior. In terms of color difference, it is more obvious under sunlight. The electroplated color tone of the GR factory is a little orange-red. Before purchasing, it is necessary to know to avoid the psychological gap after being affected. Overall, the durability is still acceptable.
Onyx dial and diamond-set hour markers
The dial is also a selling point of GR Factory. GR Factory uses high-density ceramic base and multi-layer black lacquer as an alternative to onyx, which is a natural gemstone material. GR Factory imitates the fine texture of natural onyx through engraving. Under strong light, the reflectivity of the paint surface will be slightly higher, without the matte absorption effect of natural minerals. There aren’t many people who understand gemstones. You can wear them daily with confidence as not many people will notice. The diamond hour markers set by GR factory are set with synthetic cubic zirconia (CZ diamond). The fire of this imitation diamond is more inclined to be a seven-color flickering, while the real diamond presents a cold white light. It is fixed on the disc surface through the micro-inlaying process, and the firmness test has passed. However, there is still a risk of it falling off under very strong impacts.
A replica of the Cal.2121 movement with both stability and flaws
The basic structure of the movement is a modified imitation Cal.2121 movement, not an all-in-one movement, the splint device is imitation, and the balance wheel position is different from the genuine one, which is also the most direct flaw; The 22K gold automatic tuo is made of gold-plated brass and engraved with the AP family logo. The winding efficiency is moderate, and the noise control is ok, but the smoothness is still a little poor. Accurate travel time and strong stability. For this price, the price/performance ratio is very high.
